The Electrical Permit Checklist, printed as Electrical Permit Application Checklist and Required Documents, is a City of Dallas checklist of what electrical plans must show when you apply for an electrical permit. It is one of the Dallas permit documents used with a building or master permit application, and it also sets out special rules for Master Permits, health care facilities, hazardous locations and places of assembly. On this page you can fill out the checklist online on FillingPDF and download or print the completed PDF; the original is published by the City of Dallas.
Last updated
What is Electrical Permit Checklist – Dallas, TX?
The Electrical Permit Checklist, printed as Electrical Permit Application Checklist and Required Documents, is a City of Dallas checklist of the electrical plan items and special provisions that apply when you apply for an electrical permit.
The City of Dallas issues it under the Development Services Department, and the page header shows the Planning & Development Department at 320 E Jefferson Blvd, Dallas TX 75203, (214) 948-4480. The revision date printed at the bottom is 4/7/2025. The document has no form number.
It has two parts. The first, Other Requirements or Special Provisions, covers electrical validation on a Master Permit and the extra detail needed for health care facilities, hazardous locations and places of assembly. The second is a list of eight items that electrical plans must include when they are submitted: the service and panelboard line diagram, load calculations, conductor and pipe sizes, the grounding electrode system diagram, conductor overcurrent protection, the location and number of electrical services, and a floor plan power and lighting layout.
A footnote adds a rule about who may do the work: an applicant may pay for the electrical permit on a Master Permit application but may not physically do the electrical work on a residential homesteaded property without passing a homeowner's exam. Commercial property requires a registered electrical contractor and a permit.
Who needs to file Electrical Permit Checklist – Dallas, TX?
The checklist is written for anyone who submits electrical plans with an electrical permit application in the City of Dallas. Groups it addresses:
- Applicants submitting electrical plans: the plans must include the eight items listed on the checklist.
- Applicants for a health care facility, hazardous location or place of assembly: all electrical information for these facilities must be on the plans.
- Master Permit applicants: where electrical plans were already included in the documents submitted for plan review, electrical validation on the Master Permit needs no further plan submittal.
- Owners of residential homesteaded property: you may pay for the electrical permit on a Master Permit application, but you may not physically do the electrical work unless you have passed a homeowner's exam.
- Owners of commercial property: electrical work requires a registered electrical contractor and a permit.
The checklist does not say who may sign or apply on someone else's behalf. Ask the department at (214) 948-4480 about representatives.
When to file Electrical Permit Checklist – Dallas, TX
Use the checklist when you prepare an electrical permit application and the electrical plans that go with it. It carries no due date of its own; it is completed before the plans are submitted.
If you apply for electrical validation on a Master Permit and electrical plans were already included in the documents submitted for plan review, no further plan submittal is required. The checklist sets no deadline, validity period or processing time. For timing questions, contact the department at (214) 948-4480.
Documents you need
- Electrical plans, when plans are submitted: a line diagram of the electrical service and all panelboards.
- Load calculations for all services, panelboards and feeders, as part of the electrical plans.
- Electrical conductor and pipe sizes for electrical use, shown on the plans.
- A grounding electrode system diagram with conductor sizes.
- Conductor overcurrent protection for the service conductor, shown on the plans.
- The location of the electrical service at the structure, plus the number of electrical services and their location.
- A floor plan power and lighting layout.
- For a health care facility, hazardous location or place of assembly: all electrical information for that facility included on the plans.
- For electrical validation on a Master Permit: no further plan submittal if electrical plans were included in the documents submitted for plan review.
How to fill out Electrical Permit Checklist – Dallas, TX
Read the special provisions first
Under Other Requirements or Special Provisions, check whether item 1 applies: electrical validation on a Master Permit where electrical plans were already in the plan review documents.
Check for special facility types
If your plans are for a health care facility, hazardous location or place of assembly, make sure all electrical information for it appears on the plans (item 2).
Confirm the line diagram
Mark checklist item 1 once your plans include a line diagram of the electrical service and all panelboards.
Confirm the load calculations
Mark item 2 when the plans carry load calculations for all services, panelboards and feeders.
Confirm sizes and grounding
Mark item 3 for electrical conductor and pipe sizes, and item 4 for the grounding electrode system diagram and conductor sizes.
Confirm overcurrent protection
Mark item 5 when the plans show conductor overcurrent protection for the service conductor.
Confirm service location and number
Mark item 6 for the location of the electrical service at the structure and item 7 for the number of electrical services and their location.
Confirm the power and lighting layout
Mark item 8 when the plans include a floor plan power and lighting layout.
Check who will do the work
Read the footnote: on residential homesteaded property you may not do the electrical work unless you passed a homeowner's exam, and commercial work needs a registered electrical contractor and a permit.
Review, download and print the PDF
Check that every item is marked and the plans are complete and legible, since staff cannot accept incomplete or illegible documents. Download or print the completed PDF from FillingPDF and take it with your plans to the City of Dallas.
How to submit Electrical Permit Checklist – Dallas, TX
The checklist names no portal, mailing address or drop-off rule of its own: it lists the documents that accompany an electrical permit application. Its header gives the department's contact details: Planning & Development Department, 320 E Jefferson Blvd, Dallas TX 75203, (214) 948-4480. Call that number to confirm how and where the application and plans are accepted.
Staff cannot accept incomplete or illegible documents, so gather every plan item before you go. The checklist notes that an applicant may pay for the electrical permit on a Master Permit application; ask the department about fees and payment methods. FillingPDF lets you fill out and download the PDF; submission follows the City of Dallas's own channels.
Common mistakes to avoid
- Submitting incomplete or illegible plans or documents; the checklist says staff cannot accept them.
- Leaving out electrical information for a health care facility, hazardous location or place of assembly; all of it must be on the plans.
- Providing load calculations for the main service only, when the checklist asks for all services, panelboards and feeders.
- Omitting the grounding electrode system diagram or its conductor sizes.
- Skipping the floor plan power and lighting layout, or the location and number of electrical services.
- Resubmitting electrical plans for Master Permit validation when they were already included in plan review; no further plan submittal is required.
- Doing the electrical work yourself on a residential homesteaded property without having passed a homeowner's exam, after paying for the permit on a Master Permit application.
- Treating commercial property like a homeowner job; electrical work there requires a registered electrical contractor and a permit.
Frequently asked questions
What is the Dallas Electrical Permit Checklist?
It is a City of Dallas checklist titled Electrical Permit Application Checklist and Required Documents. It lists the eight items electrical plans must include and the special provisions for Master Permits, health care facilities, hazardous locations and places of assembly.
What must electrical plans include for a Dallas electrical permit?
The checklist lists eight items: a line diagram of the service and panelboards, load calculations, conductor and pipe sizes, a grounding electrode system diagram, overcurrent protection for the service conductor, the service location, the number of services, and a floor plan power and lighting layout.
Do I need new plans for electrical validation on a Master Permit?
No, if electrical plans were included in the documents submitted for plan review. The checklist says no further plan submittal is required for electrical validation on a Master Permit in that case.
Can a homeowner do their own electrical work in Dallas?
On a residential homesteaded property, only after passing a homeowner's exam. The checklist says an applicant may pay for the permit on a Master Permit application but may not physically do the work without that exam.
Who does electrical work on commercial property in Dallas?
A registered electrical contractor. The checklist states that electrical work on commercial property requires a registered electrical contractor and a permit.
What happens if my documents are incomplete or hard to read?
Staff cannot accept them. The checklist states that incomplete or illegible documents are not accepted, so check every plan item and the legibility of each page before you submit.
Can I fill out the Dallas electrical permit checklist online?
Yes. You can fill out the PDF online on FillingPDF and download or print it. FillingPDF is an independent service and does not submit anything to the City of Dallas; you deliver your application through the city's channels.
Where do I get answers about the Dallas electrical permit process?
The checklist header lists the Planning & Development Department, 320 E Jefferson Blvd, Dallas TX 75203, (214) 948-4480. The checklist itself names no portal or submission address, so call to confirm where plans are accepted.
Ready to fill out Electrical Permit Checklist – Dallas, TX?
Fill out Electrical Permit Checklist – Dallas, TX now